Creep analysis of varying thickness on a rotating composite disk with different particle size by using Sherby’s law
*Nishi GuptaCorresponding authornishi.gupta.phd81@gmail.comDepartment of MathematicsUniversity Institute of Sciences (UIS)Chandigarh UniversityMohali, Punjab, 140413, IndiaView full profile → , Harpreet Kaurharpreet2678@yahoo.comDepartment of MathematicsUniversity Institute of Sciences (UIS)Chandigarh UniversityMohali, Punjab, 140413, IndiaView full profile → , Gargee Chakrabortygargee.e17094@cumail.inDepartment of MathematicsUniversity Institute of Sciences (UIS)Chandigarh UniversityMohali, Punjab, 140413, IndiaView full profile → , Harjot Kaurharjotmangat030@gmail.comDepartment of EngineeringGulzar Group of Institutes (GGI)Libra, Khanna, Punjab, 141401, IndiaView full profile →
* Corresponding author · click or hover a name for details
- Received:
- 01 Feb 2026
- Published Online:
- 25 Aug 2026
- Article type:
- Research Article
- Language:
- EN
- Article no.:
- JIM-2698
- Pages:
- 2619–2626
Abstract
The objective of this study is to clarify how different thicknesses affected a revolving composite disk made of AlSiCp with different particle sizes. Using mathematical modeling, the impact of different particle sizes and thicknesses on a revolving composite disk is calculated in terms of both tangential and radial stress. In comparison to various particle sizes with varied thickness long term deformation occurs. The results are displayed visually demonstrating how creep deformation decreases with changing particle size and thickness.
Keywords
Subject Classifications
References
[1] E. P. Popov, Engineering Mechanics of Solids, 2nd ed. Singapore: Pearson Education (2001).
[2] M. A. Meyers and K. K. Chawla, Mechanical Behaviour of Materials. Cambridge, U.K.: Cambridge Univ. Press (2008).
[3] V. K. Gupta, H. N. Chandrawat, S. B. Singh, and S. Ray, “Creep behaviour of a rotating functionally graded composite disc operating under thermal gradient,” Metall. Mater. Trans. A, vol. 35, no. 4, pp. 1381–1391 (2004).
[4] S. Chaurasiya and M. Suthar, “A comprehensive study on utilization of steel slag as road construction material,” Lecture Notes Civ. Eng., vol. 527, pp. 1151–1166 (2025).
[5] M. Kaptan, I. Ustabas, E. Cuce, P. M. Cuce, E. Alvur, A. Saxena, S. Alshahrani, and A. Bouabidi, “Structural and mechanical performance characteristics of construction plasters with different material compositions and advanced geopolymerization,” Jordan J. Civ. Eng., vol. 19, no. 1, pp. 145–163 (2025).
[6] A. K. Singh, M. H. Shakir, Siddhartha, S. Yadav, M. Yadav, N. M. Tripathi, and I. Fidan, “Investigations on the mechanical characterization of additively manufactured polymer composite materials fabricated via MEX,” in Advances in Pre- and Post-Additive Manufacturing Processes: Innovations and Applications. Boca Raton, FL, USA: CRC Press, pp. 64–77 (2024).
[7] V. Ahuja, S. Mehariya, R. Gurav, and S. K. Bhatia, “Exopolysaccharides based composite materials for industrial applications,” in Microbial Exopolysaccharides: Production and Applications. Boca Raton, FL, USA: CRC Press, pp. 304–321 (2024).
[8] V. Kumar and R. Sharma, “Experimental, characterization and evaluation of various composite materials for automobile components,” Int. J. Mech. Prod. Eng. Res. Dev., vol. 8, no. 3, pp. 525–540 (2018).
[9] M. Garg, B. S. Salaria, and V. K. Gupta, “Effect of thermal gradient on steady state creep in a rotating disc of variable thickness,” Procedia Eng., vol. 55, pp. 542–547 (2013).
[10] O. D. Sherby, R. H. Klundt, and A. K. Miller, “Flow stress, subgrain size, and subgrain stability at elevated temperature,” Metall. Trans. A, vol. 8, no. 6, pp. 843–850 (1977).
[11] S. B. Singh and S. Ray, “Newly proposed yield criterion for residual stress and steady state creep in an anisotropic composite rotating disc,” J. Mater. Process. Technol., vol. 143, pp. 623–628 (2003).
[12] S. B. Singh and S. Ray, “Modeling the anisotropy and creep in orthotropic aluminum–silicon carbide composite rotating disc,” Mech. Mater., vol. 34, no. 6, pp. 363–372 (2002).
[13] D. Deepak, V. K. Gupta, and A. K. Dham, “Creep modeling in functionally graded rotating disc of variable thickness,” J. Mech. Sci. Technol., vol. 24, no. 11, pp. 2221–2232 (2010).
[14] M. Garg, B. S. Salaria, and V. K. Gupta, “Modeling creep in a variable thickness rotating FGM disc under varying thermal gradient,” Eng. Comput., vol. 32, no. 5, pp. 1230–1250 (2015).
[15] V. Gupta and S. B. Singh, “Mathematical modeling of creep in a functionally graded rotating disc with varying thickness,” Regen. Eng. Transl. Med., vol. 2, no. 3, pp. 126–140 (2016).
[16] S. Sapna, A. Sharma, N. Mani, and R. Shukla, “Vibration control and optimization using circular non-homogeneity parameters,” Appl. Math., vol. 6, no. 6, p. 83 (2023).
[17] R. Durgadevi, S. Jayakumar, and R. Vijayaragavan, “Flowshop scheduling problem with objective of minimizing TCT,” J. Interdisciplinary Math., vol. 26, no. 1, pp. 1–10 (2023).
