[1] G. C. Sih, M. T. Shih, and S. Chou, “Transient Hygrothermal Stresses in Composites: Coupling of Moisture and Heat with Temperature Varying Diffusivity,” Int. J. Eng. Sci., vol. 18, no. 1, pp. 19–42 (1980).
[2] G. C. Sih, J. G. Michopoulos, and S. C. Chou, Eds., Hygrothermoelasticity. Dordrecht, The Netherlands: Martinus Nijhoff Publishers (1986).
[3] W. J. Chang, T. -C. Chen, and C.-I. Weng, “Transient Hygrothermal Stresses in an Infinitely Long Annular Cylinder: Coupling of Heat and Moisture,” J. Therm. Stresses, vol. 14, no. 4, pp. 439–454 (1991).
[4] W. J. Chang, “Transient Hygrothermal Responses in a Solid Cylinder by Linear Theory of Coupled Heat and Moisture,” Appl. Math. Modell., vol. 18, no. 8, pp. 467–473 (1994).
[5] P. K. Parhi, S. K. Bhattacharyya, and P. K. Sinha, “Hygrothermal effects on the dynamic behavior of multiple delaminated composite plates and shells,” J. Sound Vib., vol. 248, no. 2, pp. 195–214 (2001).
[6] Q. Jin and W. Yao, “Hygrothermal analysis of laminated composite plates in terms of an improved C0-type global-local model,” Aerosp. Sci. Technol., vol. 63, pp. 328-343 (2017).
[7] S. Y. Lee, C. J. Chou, J. L. Jang, and J. S. Lin, “Hygrothermal effects on the linear and nonlinear analysis of symmetric angle-ply laminated plates,” Compos. Struct., vol. 21, no. 1, pp. 41–48 (1992).
[8] H. S. Shen, “Hygrothermal effects on the postbuckling of axially loaded shear deformable laminated cylindrical panels,” Compos. Struct., vol. 56, no. 1, pp. 73–85 (2002).
[9] T. Gasch, R. Malm, and A. Ansell, “A coupled hygro-thermo-mechanical model for concrete subjected to variable environmental conditions,” Int. J. Solids. Struct., vol. 91, pp. 143–156 (2016).
[10] Z. Y. Li and Y. X. Liu, “Coupled thermo-hygro-mechanical damage model for concrete subjected to high temperatures,” Appl. Math. Mech., vol. 33, no. 4, pp. 465–482 (2012).
[11] D. Gawin and F. B. A. Pesavento, “Modelling of hygro-thermal behaviour of concrete at high temperature with thermochemical and mechanical material degradation,” Comp. Method Appl. Mech. and Eng., vol. 192, no. 13–14, pp. 1731–1771 (2003).
[12] M. Beneš and R. Stefan, “Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem,” Int. J. Heat Mass. Trans., vol. 85, pp. 110–134 (2015).
[13] A. Benkhedda, A. Tounsi, and E. A. Addabedia, “Effect of Temperature and Humidity on Transient Hygrothermal Stresses During Moisture Desorption in Laminated Composite Plates,” Compos. Struct., vol. 82, no. 4, pp. 629–635 (2008).
[14] A. Zenkour, “Hygro-Thermo-Mechanical Effects on FGM Plates Resting on Elastic Foundations,” Compos. Struct., vol. 93, no. 1, pp. 234–238 (2010).
[15] A. Zenkour, “Hygrothermoelastic Responses of Inhomogeneous Piezoelectric and Exponentially Graded Cylinders,” Int. J. Pressure Vessels Piping, vol. 119, pp. 8–18 (2014).
[16] R. Chiba and Y. Sugano, “Transient Hygrothermoelastic Analysis of Layered Plates with One-Dimensional Temperature and Moisture Variations Through the Thickness,” Compos. Struct., vol. 93, no. 9, pp. 2260–2268 (2011).
[17] M. Ishihara, Y. Ootao, and Y. Kameo, “Hygrothermal Field Considering Nonlinear Coupling Between Heat and Binary Moisture Diffusion in Porous Media,” J. Therm. Stresses, vol. 37, no. 10, pp. 1173–1200 (2014).
[18] S. Raja, P. K. Sinha, G. Prathap, and D. Dwarakanathan, “Influence of active stiffening on dynamic behaviour of Piezohygro-thermo-elastic composite plates and shells,” J. Sound Vib., vol. 278, no. 1–2, pp. 257–283 (2004). 
[19] J. Aboudi and T. O. Williams, “A coupled micro-macromechanical analysis of hygrothermoelastic composites,” Int. J. Solids Struct., vol. 37, no. 30, pp. 4149–4179 (2000).
[20] V. V. S. Rao and P. K. Sinha, “Dynamic response of multidirectional composites in hygrothermal environments,” Compos. Struct., vol. 64, no. 3–4, pp. 329–338 (2004).
[21] M. H. Zhao, H. Y. Dang, C. Y. Fan, and Z. T. Chen, “Three-dimensional steady-state general solution for isotropic hygrothermoelastic media,” J. of Ther. Stres., vol. 41, no. 8, pp. 951-972 (2018).
[22] J. Tong, B. K. Zhang, Z. L. Xu, J. Su, and P. F. Hou, “Two-dimensional steady-state general solutions for isotropic hygrothermoelastic media with applications,” Zeitsc. Fur. Angew. Math. Phys., vol. 70, no. 5, pp. 1-15 (2019). 
[23] A. Montanaro, “On Singular Surfaces in Isotropic Linear Thermoelasticity with Initial Stress,” J. Acoust. Soc. Am., vol. 106, no. 3, pp. 1586–1588 (1999).
[24] M. I. A. Othman and Y. Song, “Reflection of Plane Waves from an Elastic Solid Half-Space Under Hydrostatic Initial Stress Without Energy Dissipation,” Int. J. Solids Struct., vol. 44, no. 17, pp. 5651–5664 (2007).
[25] B. Singh, A. Kumar, and J. Singh, “Reflection of Generalized Thermoelastic Waves from a Solid Half-Space Under Hydrostatic Initial Stress,” Appl. Math. Comp., vol. 177, no. 1, pp. 170–177 (2006).
[26] B. Singh, “Effect of Hydrostatic Initial Stress on Waves in a Thermoelastic Solid Half-Space,” Appl. Math. Comp., vol. 198, no. 2, pp. 494–505 (2008).
[27] B. Singh, “Wave Propagation in an Initially Stressed Transversely Isotropic Thermoelastic Solid Half Space,” Appl. Math. Comp., vol. 217, no. 2, pp. 705–715 (2010).
[28] S. M. Abo-Dahab, “Reflection of P and SV Waves from a stress-free Surface Thermoelastic Half-Space Under the Influence of a Magnetic Field and Hydrostatic Initial Stress Without Energy Dissipation,” J. Vib. Control, vol. 17, no. 14, pp. 2212–2221 (2011).
[29] I. A. Abbas and M. I. Othman, “Generalized Thermoelastic Interaction in a Fibre-Reinforced Anisotropic Half Space Under Hydrostatic Initial Stress,” J. Vib. Control, vol. 18, no. 2, pp. 175–182 (2012).
[30] M. I. Othman and S. Y. Atwa, “Thermoelastic Plane Waves for an Elastic Solid Half-Space Under Hydrostatic Initial Stress of Type III,” Meccanica, vol. 47, no. 6, pp. 1337–1347 (2012).
[31] A. K. Yadav, H. S. Mahato, S. Kumari, and P. Jurczak, “Analysis of reflection of wave propagation in magneto-thermoelastic nonlocal micropolar orthotropic medium at impedance boundary,” Int. J. of Nume. Methods for Heat & Fluid Flow, vol. 34, no. 9, pp. 3416–3437 (2024).
[32] S. Kapila, H. Nagar, and S. Sharma, “MSM fractional calculus operator pertaining to generalized modified Bessel function of the second type,” J. of Inter. Mathe., vol. 27, no. 8, pp. 1749–1755 (2024).
[33] W. J. Chang and C. I. Weng, “An analytical solution to coupled heat and moisture diffusion transfer in porous materials,” Int. J. of Heat and Mass Trans., vol. 43, no. 19, pp. 3621-3632 (2000).
[34] Y. C. Yang, S. S. Chu, H. L. Lee, and S. L. Lin, “Hybrid numerical method applied to transient hygrothermal analysis in an annular cylinder,” Int. Commu. in Heat and Mass Trans., vol. 33, no. 1, pp. 102-111 (2006).
[35] P. Ailawalia, D. Gupta, and V. Sharma, “Surface waves in hygrothermoelastic half-space with hydrostatic initial stress,” Mecha. of Adv. Mate. and Struc., vol. 29, no. 16, pp. 2380–2389 (2022).
[36] M. H. Zhao, H. Y. Dang, C. Y. Fan, and Z. T. Chen, “Three-dimensional steady-state general solution for isotropic hygrothermoelastic media,” J. of Ther. Stres., vol. 41, no. 8, pp. 951-972 (2018). 
[37] S. Kumar, H. Nagar, and S. Kumari, “Reflection of Plane Wave at the Interface Between Thermoelastic and Hygrothermoelastic Solid Half Space,” Mech. Solids, vol. 60, pp. 384–402 (2025).
[38] P. Ailawalia, A. Sharma, A. M. S. Mahdy, and E. S. Elidy, “Analysis of a non-Homogeneous Hygro-Thermoelastic Layer Immersed in Non-Viscous Fluid,” Mech. Solids, vol. 60, pp. 1387–1403 (2025).
[39] S. Kumari, Bharti, and B. Singh, “Effects of Two-Temperature on Rayleigh Wave in Generalized Magneto-Thermoelastic Media with Hydrostatic Initial Stress,” J. Heat Trans., vol. 141, no. 7, pp.1-7 (2019).
[40] H. Sharma and S. Kumari, “Effects of Two-Temperature, Rotation, Initial Stressed Magnetic Field on Rayleigh Wave in Half-Plane,” J. Heat Trans., vol. 142, no. 4, pp. 1-7 (2020).
[41] S. Kumar, H. Nagar, and S. Kumari, “Plane wave reflection in micropolar hygro-thermoelastic half-space,” J. of Ther. Stres., vol. 47, no. 1, pp. 1–19 (2024).